top of page

Item List

Starothane SL 1000 Features:
 Seamless: easily cleanable to maintain high standards of hygiene
 Self-smoothing: provides a flat high gloss finish
 Tough & Hard wearing: durable with low maintenance cost
 Supplied in pre-measured packs for ease of mixing and consistency at site
 Forms a monolithic flooring which does not require joint, Hygienic and healthy
 Easy to clean. It can be cleaned by detergent and cleaning agents containing solvent,
 Forms a semi-gloss surface, and
 Wear and skid resistant
Starothane SL 1000 has excellent resistance at ambient temperatures to a wide range of industrial chemicals. Specific data is available on request. Note that it is especially important that spillage is cleaned up quickly since much higher concentrations of chemicals may occur on evaporation.

Starothane SL 1000

Polyurethane Self Leveling Gloss Flooring Topcoat

Staroxen SL 1000 is designed for use in wide range of industrial environments where a lasting solution to floor maintenance problems is required. It provides a dense, impervious, coloured floor surface which is hygienic and easy to clean. Typical applications include:
Laboratories & clean rooms
Food and beverage production, kitchens
Electronics and electrical industry
Pharmaceutical manufacturing
Warehouses and storage areas
Automotive manufacturing
Textile and paper mills
Chemical industry, plant rooms
General medium to heavy industry
Light Industrial Parts
Engineering industries/Auto industries
Hospitals
Electronic Handling / Manufacturing
Pharmaceutical –Bulk and Formulation.
Computer assembly units
IT and other Commercial Buildings

Staroxen SL 1000

Solventfree EPU Self Leveling Topcoat

Engineering industries & Auto industries
Clean rooms, Laboratories &Hospitals
Electronic Handling & Manufacturing unit.
Pharmaceutical –Bulk and Formulation.
Computer assembly units
IT and other Commercial Buildings

Staroxy SL 1000

Self Leveling Epoxy SL Flooring Topcoat

Staroxy SL 1000 HG is resistant to wide range of liquids and chemicals like most dilute acids (acetic, oleic, citric, hydrochloric, nitric and sulphuric acid), milk, animal fats and vegetable oils, sugars flavourings, essences, mineral oils, kerosene, petrol, mineral spirit, brake fluids, detergents etc. Chemical spillages should always be wiped up as quickly as possible and not be allowed to concentrate up by evaporation. We provide best quality material with minimum optimum cost per square feet.
Staroxy SL 1000 HG can be used as a topcoat for resin floors in
Laboratories & clean rooms
Food and beverage production
Electronics and electrical industry
Pharmaceutical manufacturing
Warehouses and storage areas
Automotive manufacturing
Textile and paper mills
Chemical industry
General medium to heavy industry

Staroxy SL 1000 HG

High gloss Self Leveling Epoxy Flooring Topcoat Material

Staroxy SL 500 can be used extensively in, but is not limited to the following areas of application:
• Chemical manufacturing plants.
• Pharmaceutical and other medical facilities.
• Car production and showroom facilities.
• Aircraft hangers and maintenance areas.
• Warehouses with high density traffic.
• Food and beverage production areas.
• Vehicle movement areas.

Staroxy SL 500

Food Grade Self Leveling Epoxy Floor Coating

Staroxy FC SL 1000/2000 Semigloss Epoxy is a multi-use epoxy designed for coating items including commercial substrates requiring a durable and resistant finish. This product will not cure at surface temperatures below 7.2 °C (45 °F). Do not paint if surface temperature is within 5 degrees of the dew point or if rain is expected within 12 hours.
The base component dictates the colour of the mixed kit, while the converter determines the gloss and film build level.

Staroxy FC SL 1000 and 2000

Four Component Semi-gloss Self Leveling Epoxy Flooring

• Staroguard Simkem can be used for thin coat plastering on inner and outer walls. It can also be used effectively on brick, block, stone walls as well as concrete surfaces.
• Ideal for well-prepared walls with maximum thickness of plastering in the range of 3-6 mm. Highly recommended over Mivan finishes, smooth concrete areas without any hacking of the surfaces.
• Suitable as a direct surface finishing material for columns, ceilings, beams. Very effective for filling the plumbing and electrical conduit linings. Staroguard Simkem can be used as a top coat thin screed layer after the water proofing applications with Starocrackseal.

Staroguard Simkem

Single Component Concrete Cementitious Underlay

It is a three-component water dispersed epoxy resin coating framework provided in pre-weighed packs prepared for on-site blending and utilize. The cured film shapes a hard, flexible, matt coating to concrete and other substrates. The item is accessible in a wide run of standard and is additionally accessible in a clear grade.

Staroxy 112 WB UL

Waterbased Epoxy Flooring Basecoat / Screed

Staroxy 110 MOT UL Features:
For hygienic, dust free floors
Excellent mechanical and chemical resistance
Economical underlay
Seamless
Self-smoothing
Solvent free
Excellent adhesion to cementitious substrates and subsequent finishes
Tough & Hard wearing: durable with low maintenance cost
Resistant to a wide range of chemicals and liquids

Staroxy 110 MOT UL

Solventfree MOT Epoxy Flooring Basecoat

Staroxy UL 108 Features:
Economical underlay
Seamless
Self-smoothing
Solvent free
Excellent adhesion to cementitious substrates and subsequent finishes
Tough & Hard wearing: durable with low maintenance cost
Resistant to a wide range of chemicals and liquids
Designed for a wide range of floors exposed to extreme wear and tear. Recommended for steel plants, plant rooms, factories, aircraft hangars, food and beverage plants and oil refineries.

Staroxy UL 108

Heavy Duty Epoxy Flooring Screed

Staroxy 109 SL Screed Features:
Economical underlay
Seamless
Self-smoothing
Solvent free
Excellent adhesion to cementitious substrates and subsequent finishes
Tough & Hard wearing: durable with low maintenance cost
Resistant to a wide range of chemicals and liquids

Staroxy 109 SL Screed

Self Leveling Epoxy Flooring Basecoat/Screed/Underlay

Designed for a wide range of surfaces with various levels of mechanical and chemical exposure. Recommended for warehouses structures, garages, dairies, factories, laboratories, aircraft hangars, food, beverage and plant rooms.

Staroxy 101 SB

Solvent Based Epoxy Primer

bottom of page